Boat Ladder Extension

Product Information

Boat Ladder Extension for yachts includes the hull and the escalator. The escalator is made up of several ladder sections. Each ladder section includes two straight rods arranged symmetrically. The lower ends of the two straight rods are connected by a pedal. Anti-skid plate, the straight rod of the lower step is sleeved in the straight rod of the upper step. The straight rod is a cone-shaped rod with a large upper and a small lower. A chamber for accommodating the escalator is provided on the plywood of the hull. The chamber should be provided with a cavity cover, and slide rails are provided on both sides of the chamber. Sliders are provided on the slide rails. The back side of the chamber is provided with an opening that is conducive to the passage of the escalator. The utility model can directly put the escalator ladder in the chamber after it is stowed, and the escalator is well hidden, so that the overall beauty of the yacht is not damaged, and at the same time , The escalators located in the chamber can be dried, disinfected and cleaned to reduce the erosion of the escalators by sea water or salt spray.

Features

Boat Ladder Extension can keep your fishing boat while allowing you or your children to swim without having to go back to the boat. It is the most important supplement to boats, especially yachts. It is made of marine-grade fiberglass, stainless steel hardware, and top marine materials. With outboard (monorail) or outboard (double rail) models, ourladder extension fits most of any beams. At the same time, it is equipped with all the required installation hardware and brackets as well as simple installation instructions.

Details

● Get the most out of your boat by increasing the usable space and facilitating easy entry and exit.

● High strength fiberglass will not bleach, fade or crack; Stainless steel construction designed to withstand harsh marine conditions.

● Measures 18" wide x 14" deep x 11" rail height.

● Supplied with all mounting hardware, brackets, and simple mounting instructions.

● Can be mounted on either side of your motor depending on best fit.